TeSys K contactor - 3P - AC-3 <= 440 V 12 A - 1 NC aux. - 220...230 V AC coil
Schneider Electric

TeSys K contactor - 3P - AC-3 <= 440 V 12 A - 1 NO aux. - 24 V AC coil
Schneider Electric

TeSys K contactor - 3P - AC-3 <= 440 V 16 A - 1 NO aux. - 24 V AC coil
Schneider Electric

Schneider Spacial CRN (NSYCRN108300) is a professional-grade wall-mounted steel enclosure engineered for the most demanding industrial environments. With dimensions of 1000x800x300 mm, it offers massive internal space for housing high-power motor drives (VFDs), large contactor banks, and integrated PLC systems.

Constructed from a single folded and welded steel sheet, it features a double-thickness gutter-shaped front rail to maintain its IP66 seal against high-pressure water and dust. The exterior is protected by a textured RAL 7035 light grey epoxy-polyester powder coating for maximum corrosion resistance. Sold without a mounting plate, it provides a high-volume blank canvas for custom panel building and heavy-duty industrial wiring.

Key Technical Features:

Industrial Scale Protection: Rated IP66 (waterproof and dust-tight) and IK10 for the highest level of mechanical impact protection.

Extra Deep 300mm Frame: Ideal for components with large heat sinks and provides extra room for thick cable bending radii.

Professional Door Construction: Features a plain, reversible steel door with a 120° opening angle and a high-security 3mm double-bar lock.

Optimized Cable Management: Equipped with two large, removable cable gland plates at the bottom for flexible entry of multiple power and control cables.

Corrosion Resistance: High-durability finish designed for long life in industrial plants, chemical sites, and outdoor installations.

Schneider Spacial CRN (NSYCRN75250) is a wall-mounted universal steel enclosure built to safeguard critical equipment in demanding environments. Featuring a generous 250 mm depth, this model is specifically engineered to accommodate deep-frame contactors, cooling units, and large VFDs.

Constructed from a high-quality folded and welded single sheet of steel, it features a double-thickness front rail to prevent water or dust entry even when the door is opened. The enclosure is finished in a textured RAL 7035 light grey epoxy-polyester powder, ensuring superior resistance to chemicals and outdoor elements. Sold without a mounting plate, it offers engineers the ultimate blank canvas for custom industrial designs.

Key Technical Features:

Total Environmental Shield: Rated IP66 for complete protection against fine dust and high-pressure water jets.

Mechanical Durability: Rated IK10, the highest standard for protection against external mechanical impacts.

Deep Internal Space: The 250 mm depth facilitates better air circulation and fits components that standard 150mm or 200mm boxes cannot.

Professional Door Design: Plain reversible steel door with a 120° opening and a secure 3mm double-bar lock.

Integrated Gland Plate: Features a removable cable gland plate at the bottom for quick, professional wiring entry.

The Schneider Spacial CRN (NSYCRN86250) is a heavy-duty, wall-mounted steel enclosure built for maximum protection and space. Measuring 800x600x250 mm, it is a versatile solution for housing large-scale electrical components. The body is constructed from a single folded and welded sheet, featuring a double-sheet thickness gutter-shaped front rail to ensure a perfect seal.

Finished in a durable RAL 7035 light grey epoxy-polyester powder, it is highly resistant to industrial chemicals and environmental stress. This model is supplied without a mounting plate, offering ultimate flexibility for custom interior designs using modular chassis or deep-mount systems.

Key Technical Features:

Industrial Grade Protection: Rated IP66 for complete protection against dust and high-pressure water jets, and IK10 for maximum mechanical impact resistance.

Extra Deep Frame: The 250mm depth is ideal for large contactors, heavy-duty VFDs, and deep-mounted busbar systems.

Reinforced Door: The plain steel door features a 120° opening, is fully reversible, and is secured by a high-quality 3mm double-bar lock.

Integrated Gland Plate: Includes a large, removable cable gland plate at the bottom to simplify wiring and entry management.

Corrosion Resistant: Built to last in demanding environments with a high-resistance textured powder finish.

Schneider NSYMM106 (SKU: NSYMM106) is a heavy-duty internal mounting plate specifically engineered for the Spacial CRN, S3D, S3X, and Thalassa PLM enclosure ranges. This plate is manufactured from high-grade galvanized sheet steel, offering a corrosion-resistant and electrically conductive surface that is essential for grounding industrial assemblies.

Its tall, plain surface gives panel builders maximum freedom to mount high-density arrangements of contactors, PLC racks, and power supplies. Designed to withstand significant mechanical stress, the NSYMM106 ensures that components remain securely fastened, even in environments prone to industrial vibration.

Key Technical Features:

Precision Fit: Optimized for Schneider enclosures measuring 1000mm (H) x 600mm (W).

Corrosion Protection: The zinc-coated galvanized finish eliminates the need for painting and provides long-term resistance to rust.

High Load Capacity: Rated for a permanent permissible load of 135kg, making it suitable for heavy industrial gear and cable management systems.

Integrated Grounding: The galvanized surface ensures excellent electrical continuity for mounting components, simplifying the earthing process.

Easy Installation: Features pre-drilled corner mounting holes that align perfectly with the enclosure's back-studs for a fast, secure fit.

Schneider NSYMM108 (SKU: NSYMM108) is a heavy-duty internal mounting plate specifically engineered for the Spacial CRN, S3D, S3X, and Thalassa PLM enclosure ranges. This plate is manufactured from high-grade galvanized sheet steel, offering a corrosion-resistant and electrically conductive surface that is essential for grounding large industrial assemblies.

Its expansive plain surface gives panel builders maximum freedom to mount high-density arrangements of MCCBs, large contactors, PLC racks, and heavy power supplies. Designed to withstand significant mechanical stress, the NSYMM108 ensures that even the heaviest electrical components remain securely fastened in place without sagging.

Key Technical Features:

Precision Fit: Optimized for Schneider enclosures measuring 1000mm (H) x 800mm (W).

Corrosion Protection: Zinc-coated galvanized finish provides long-term durability against rust and industrial pollutants.

Extreme Load Capacity: Rated for a permanent permissible load of 150kg, making it one of the strongest plates in the Spacial accessory line.

Seamless Grounding: The galvanized surface ensures excellent electrical continuity for mounting components, simplifying the earthing process.

Easy Installation: Features pre-drilled corner mounting holes that align perfectly with the enclosure's back-studs for a fast, secure fit.

The Schneider NSYMM3025 (SKU: NSYMM3025) is a high-quality internal chassis designed for enclosures with a nominal size of 300mm high by 250mm wide. Crafted from robust galvanized sheet steel, this plate offers a corrosion-resistant and durable surface for mounting heavy electrical gear, contactors, and control units.

Its plain, non-perforated surface provides maximum flexibility, allowing technicians to drill custom holes exactly where needed. Whether you are building a motor starter or a complex control panel, the NSYMM3025 ensures your internal components are held securely and grounded effectively.

Key Technical Features:

Perfect Fit: Specifically engineered for Schneider Spacial CRN, S3D, S3X, and Thalassa PLM enclosures of 300x250mm dimensions.

Galvanized Protection: The zinc-coated finish prevents rust and ensures long-term reliability, even in humid industrial environments.

Heavy Load Support: With a permanent permissible load of 60kg, it easily supports heavy power supplies and transformers.

Easy Installation: Pre-drilled corner holes align perfectly with the enclosure's mounting studs for quick, tool-aligned assembly.

Electrical Continuity: The galvanized surface naturally provides better electrical earthing (grounding) for the components mounted upon it.

Schneider NSYMM43 (SKU: NSYMM43) is a high-quality internal chassis specifically engineered for Spacial CRN, S3D, S3X, and Thalassa PLM industrial enclosures. This plate is manufactured from galvanized sheet steel, offering a corrosion-resistant surface that is ideal for demanding industrial and commercial environments.

Its plain, non-perforated surface provides panel builders with total freedom to layout and drill for components such as contactors, relays, and small PLCs. The NSYMM43 is designed to provide a stable mounting surface that ensures your electrical internal assembly remains secure and perfectly grounded.

Key Technical Features:

Exact Fit: Precision-sized for Schneider 400x300mm enclosures.

Corrosion Resistance: The galvanized zinc finish eliminates the need for painting and ensures long-term resistance to rust.

Reliable Support: Rated for a permanent permissible load of 60kg, providing exceptional strength for a medium-sized plate.

Integrated Grounding: The galvanized surface naturally provides better electrical earthing (grounding) for the components mounted upon it.

Fast Installation: Features pre-drilled corner holes that align perfectly with the enclosure's mounting studs for a quick, stable assembly.

Schneider NSYMM54 (SKU: NSYMM54) is a heavy-duty internal mounting plate designed for the Spacial CRN, S3D, S3X, and Thalassa PLM enclosure ranges. Built for durability, this plate is constructed from galvanized sheet steel, offering a corrosion-resistant surface that is ideal for demanding industrial environments.

With its plain, non-perforated design, the NSYMM54 allows panel builders complete freedom to layout and drill for components such as PLCs, contactors, and terminal blocks. It is engineered to handle substantial weight, ensuring your internal electrical assembly remains secure even in high-vibration settings.

Key Technical Features:

Perfect Compatibility: Precision-engineered for 500x400mm Schneider enclosures.

Corrosion Resistance: The galvanized finish eliminates the need for painting and ensures excellent electrical conductivity for grounding.

High Load Capacity: Rated for a permanent permissible load of 90kg, making it suitable for heavy industrial gear and power supplies.

Easy Mounting: Direct installation onto the enclosure's back-studs with pre-drilled corner fixing points.

Professional Finish: Provides a clean, industrial look while maintaining rigid support for all internal DIN rails and wiring ducts.

Schneider NSYMM64 (SKU: NSYMM64) is a robust internal mounting chassis engineered for the Spacial CRN, S3D, S3X, and Thalassa PLM enclosure ranges. Fabricated from galvanized sheet steel, this plate offers a corrosion-resistant surface that is perfect for heavy-duty industrial environments.

With its plain, non-perforated design, the NSYMM64 provides panel builders with complete freedom to layout and drill for components such as MCCBs, contactors, and PLCs. It is engineered to maintain a flat, rigid surface even when loaded with heavy industrial gear, ensuring a professional and secure installation.

Key Technical Features:

Perfect Compatibility: Precision-engineered for 600x400mm Schneider industrial enclosures.

Galvanized Protection: The zinc-coated finish prevents rust and ensures excellent electrical conductivity for grounding internal components.

High Load Capacity: Rated for a permanent permissible load of 90kg, making it suitable for heavy power supplies and transformers.

Fast Installation: Features pre-drilled corner fixing points that align perfectly with the enclosure's back-studs for quick assembly.

Professional Rigidity: The 1.8mm thickness ensures a stable mount that resists vibration and mechanical stress.

Schneider NSYMM65 (SKU: NSYMM65) is a high-quality internal mounting plate specifically engineered for the Spacial CRN, S3D, S3X, and Thalassa PLM enclosure ranges. Built for industrial longevity, this plate is manufactured from galvanized sheet steel, offering a corrosion-resistant surface that is perfect for demanding factory and outdoor environments.

Its plain, non-perforated surface provides panel builders with total freedom to layout and drill for components such as MCCBs, PLCs, and heavy-duty contactors. The NSYMM65 is designed to handle significant weight, ensuring that your electrical internal assembly remains secure and perfectly grounded.

Key Technical Features:

Precision Compatibility: Specifically sized for 600x500mm Schneider industrial enclosures.

Galvanized Protection: The zinc-coated finish eliminates the need for extra painting and ensures long-term resistance to rust.

High Load Support: Rated for a permanent permissible load of 110kg, easily supporting heavy power supplies and large industrial gear.

Integrated Grounding: The galvanized surface provides excellent electrical continuity for mounting components, simplifying the earthing process.

Fast Assembly: Pre-drilled corner holes align exactly with the back-studs of the enclosure for a quick and stable installation.

Schneider NSYMM75 (SKU: NSYMM75) is a heavy-duty internal mounting plate specifically engineered for the Spacial CRN, S3D, S3X, and Thalassa PLM enclosure ranges. Built for industrial longevity, this plate is manufactured from galvanized sheet steel, offering a corrosion-resistant surface that is perfect for demanding factory and infrastructure environments.

Its expansive plain, non-perforated surface provides panel builders with total freedom to layout and drill for components such as MCCBs, large contactors, PLC racks, and power supplies. The NSYMM75 is designed to handle substantial weight, ensuring that your electrical internal assembly remains secure, vibration-resistant, and perfectly grounded.

Key Technical Features:

Precision Compatibility: Specifically sized for 700x500mm Schneider industrial enclosures.

Galvanized Protection: The zinc-coated finish eliminates the need for painting and ensures long-term resistance to rust and oxidation.

High Load Support: Rated for a permanent permissible load of 110kg, easily supporting heavy industrial gear and control transformers.

Integrated Grounding: The galvanized surface provides excellent electrical continuity for mounting components, simplifying the earthing process.

Fast Assembly: Pre-drilled corner holes align exactly with the back-studs of the enclosure for a quick and stable installation.

Schneider NSYMM86 (SKU: NSYMM86) is a heavy-duty internal mounting plate specifically engineered for the Spacial CRN, S3D, S3X, and Thalassa PLM enclosure ranges. This plate is manufactured from high-grade galvanized sheet steel, offering a corrosion-resistant and electrically conductive surface that is essential for grounding large industrial assemblies.

Its expansive plain surface gives panel builders maximum freedom to mount high-density arrangements of MCCBs, large contactors, PLCs, and heavy power supplies. Designed to withstand significant mechanical stress, the NSYMM86 ensures that even the heaviest electrical components remain securely fastened in place.

Key Technical Features:

Precision Fit: Optimized for Schneider enclosures measuring 800mm (H) x 600mm (W).

Corrosion Protection: Zinc-coated galvanized finish provides long-term durability against rust and industrial pollutants.

Extreme Load Capacity: Rated for a permanent permissible load of 135kg, making it one of the strongest plates in the Spacial accessory line.

Seamless Grounding: The galvanized surface ensures excellent electrical continuity for mounting components, simplifying the earthing process.

Easy Installation: Features pre-drilled corner mounting holes that align perfectly with the enclosure's back-studs for a fast, secure fit.

Mitsubishi Electric S-N125 Contactor is a high-performance, heavy-duty motor starter designed for industrial control applications that demand reliability, durability, and efficiency.
With a rated current of 120A and motor power up to 60kW (AC-3 duty), this contactor provides robust and consistent switching performance for motors, compressors, pumps, HVAC systems, and automation panels.

Equipped with a 220V AC control coil and auxiliary contacts (2NO + 2NC), the S-N125 ensures flexible and precise control for complex circuits.
Manufactured by Mitsubishi Electric Japan, it guarantees exceptional electrical endurance, reduced maintenance, and energy-efficient operation, making it a preferred choice for engineers, system integrators, and industrial maintenance teams.

Key Features & Specifications:
Model: Mitsubishi Electric S-N125
Rated Current: 120A
Rated Power: 60kW (AC-3 Duty)
Coil Voltage: 220V AC
Auxiliary Contacts: 2 Normally Open + 2 Normally Closed (2NO + 2NC)
Application: Industrial automation, motor control, HVAC, pumps, compressors
Mounting Type: DIN rail or panel mount
Origin: Made in Japan

Mitsubishi Electric S-N150 Contactor is a heavy-duty industrial contactor engineered for reliable control of large motors, compressors, pumps, and automation systems.
With a rated current of 150A and a motor capacity up to 75kW (AC-3 duty), it provides powerful and durable switching performance for demanding industrial applications.

This model includes a 220V AC control coil and 2 normally open (2NO) + 2 normally closed (2NC) auxiliary contacts, ensuring flexible control options and accurate circuit signaling.
Manufactured by Mitsubishi Electric Japan, the S-N150 guarantees exceptional reliability, long electrical life, and safe operation in harsh environments.

Key Features & Specifications:
Model: Mitsubishi Electric S-N150
Rated Current: 150A
Rated Power: 75kW (AC-3 duty)
Coil Voltage: 220V AC
Auxiliary Contacts: 2NO + 2NC
Applications: Motor control, HVAC, water treatment, compressors, automation panels
Mounting: DIN rail or panel mounting
Origin: Made in Japan

Mitsubishi Electric S-N180 Contactor is a high-performance industrial motor starter designed for demanding heavy-duty applications. With a rated current of 180A and a motor capacity of up to 90kW (AC-3 duty), it provides powerful and reliable control for motors, compressors, HVAC systems, and automation panels.

Equipped with a 220V AC control coil and 2 Normally Open (2NO) + 2 Normally Closed (2NC) auxiliary contacts, the S-N180 ensures accurate switching, safe operation, and long electrical life even under continuous load conditions.
Manufactured by Mitsubishi Electric Japan, this contactor combines Japanese engineering quality, energy efficiency, and durability, making it ideal for factories, industrial workshops, and automation integrators.

Key Features & Specifications:
Model: Mitsubishi Electric S-N180
Rated Current: 180A
Rated Power: 90kW (AC-3 duty)
Coil Voltage: 220V AC
Auxiliary Contacts: 2NO + 2NC
Applications: Motor control, HVAC, water treatment, pumps, compressors, automation panels
Mounting Type: DIN rail or panel mount
Origin: Made in Japan

Mitsubishi Electric S-T10 contactor is a high-performance solution for reliable motor control in industrial and commercial applications.
With a rated operational current of 9A and power handling up to 4kW (AC-3 duty), this contactor ensures stable operation even under heavy-duty cycles.
Designed with a 220V AC coil and auxiliary contacts (1NO+1NC), the S-T10 provides superior switching precision, long service life, and compatibility with a wide range of motor starters and automation systems.

Key Features:
Model: Mitsubishi Electric S-T10
Rated Power: 4kW (AC-3)
Rated Current: 9 Amperes
Coil Voltage: 220V AC
Contacts: 1 Normally Open (NO) + 1 Normally Closed (NC)
Applications: Motor starters, HVAC, pumps, compressors, and automation panels
Mounting: DIN rail or screw mounting

Why Choose Mitsubishi Electric Contactors?
Mitsubishi contactors are known worldwide for superior electrical endurance, low coil power consumption, and compact design, making them ideal for control circuits, lighting, and power distribution panels.
Buy the S-T10 Contactor from Spark Industrial for guaranteed authenticity, competitive pricing, and fast delivery across Egypt.